With Windows 10, the problem “Ethernet does not have a proper IP configuration” is very common. When you try to use the internet, this error appears.
This problem is unsolvable even with the Windows troubleshooting function. The remedies listed below will help you resolve this error, but first you must understand why it occurs.
In Windows 10, How Can I Fix Ethernet Doesn’t Have a Valid IP Configuration?
The IP address is automatically identified by network services. Because of a DHCP issue, your modem or router will be unable to connect to an IP address, and you will be unable to browse the internet. So, to fix this issue, try the options listed below.
Read Also:
1. Reset TCP/IP Settings Manually
Step 1: To begin, go to the Start menu.
Step 2: Then, in the search box, type Run and press the Enter key.
Step 3: Next, put cmd into the Run window and press the Enter key.
Step 4: Type netsh winsock reset in the command prompt window and press Enter.
Step 5: Type netsh int ip reset into the command prompt window and hit Enter.
Step 6: Last but not least, restart your computer.
2. Change Your Network Settings
Step 1: To begin, go to the Start menu.
Step 2: Then, in the search box, type Run and press the Enter key.
Step 3: Next, put cmd into the Run window and press the Enter key.
Step 4: Type the following commands in the command prompt window, remembering to press Enter after each instruction.
nbtstat -R nbtstat -RR netsh winsock reset ipconfig /flushdns nbtstat -R nbtstat -RR netsh winsock reset
Step 5: Restart your computer’s operating system.
Step 6: After that, select the Network icon.
Step 7: Right-click and select Disable Ethernet.
Step 8: Reconnect to your internet connection.
3. Reinstall TCP/IP
Step 1: To begin, select the Network icon.
Step 2: Next, find and open your network adapter’s properties.
Step 3: Now select the Install option.
Step 4: Now choose Protocol from the drop-down menu. After that, select the Add icon.
Step 5: Finally, click Ok after selecting Reliable Multicast Protocol.
4. Antivirus Software
Step 1: Open any anti-virus programme (Norton, Panda, Avira, and so on) and turn it off.
Step 2: For at least 15 minutes, turn off your antivirus programme.
Step 3: Check for errors by reconnecting your Chrome browser.
Step 4: Finally, click the Start button to access the Control Panel.
Step 5: From the Control Panel window, go to the System and Security tab.
Step 6: Next, select the Windows Firewall icon.
Step 7: Finally, turn on the switch. Restart Windows Firewall after turning it off.
5. Run The Windows Troubleshooter
Step 1: To begin, go to the Start menu.
Step 2: Then, in the search field, type troubleshooting and press the Enter key.
Step 3: Then, in the left pane of the pop-up window, open the option labelled “View All.”
Step 4: Next, enter the Internet tab by clicking on the Change your Networking Settings icon.
Step 5: Next, tick the option to Run the Troubleshooter and click Next.
Step 6: Choose Run as Administrator from the drop-down menu.
Step 7: The Close button will appear after some time, and you should click it.
6. Turn Off IPv6
Step 1: To begin, select the Network icon.
Step 2: Next, find and open your network adapter’s properties.
Step 3: Uncheck Internet Protocol Version 6 (TCP/IP) from the list.
Step 4: Save your modifications and restart your computer.
7. Make DHCP Services Available
Step 1: To begin, go to the Start menu.
Step 2: Then, in the search box, type Run and press the Enter key.
Step 3: Next, type services.msc into the Run box and hit Enter.
Step 4: In the Services pane, look for DHCP Client.
Step 5: Double-click it to bring up its properties.
Step 6: In the Startup type, choose Automatically. Get your services up and running. Now, click the Apply button to save your changes.
Read Also:
Conclusion
To summarise, this post has covered all of the solutions for the “Ethernet doesn’t have a correct IP configuration” error in Windows 10. We wish you luck in resolving this issue. Any questions or recommendations are always welcomed.
