When you try to connect to the internet by wifi or Ethernet on your computer, you may find that you are unable to do so; in this case, use the Windows Network Diagnostic Tool to resolve the problem.
You can get a Windows Can’t Communicate With The Device or Resource (main DNS server) issue once the troubleshooting is finished. The reason for this error message is that your device isn’t looking for Lesley’s DNS records.
It is, however, connected to a static DNS server outside of Lesley’s network. Other probable causes include Network Driver difficulties, improperly configured IPv4 and IPv6 settings, the use of a proxy server, and network settings conflict issues.
Prior to attempting the methods given below, try disabling proxy servers. If you’re using a limited internet connection, such as at school, work, or a public WiFi hotspot, it’s best not to fiddle with the settings because it could lead to more problems.
Various parameters and guidelines are used in all of these interactions. It can also cause problems with your settings and prevent you from using the internet.
Read Also:
Contents
How To Resolve The Can’t Communicate With Device or Resource Error in Windows
You might now be wondering how to resolve the Windows Can’t Communicate With The Device or Resource problem on your computer. Don’t worry, we’ll learn how to solve this problem in this article.
There, we’ll go over four options for resolving this vexing problem. If you have a Windows operating system version 7 or higher, you can attempt these solutions to fix the problem.
Method 1: Automatically Obtain The DNS Server Address and IP Address
The packet-switched connection layer is to be used with Internet Protocol Version 4 (IPv4), which has an addressing capacity of around 4.3 billion addresses.
IPv6, on the other hand, is a more advanced protocol that can handle an endless number of addresses. IPv4 employs four one-byte decimal numbers, while IPv6 use hexadecimal numbers.
It’s possible that you haven’t properly chosen adapter settings as a reason of Windows can’t interact with the device or resource error messages. You can make some changes by following these steps:
Step 1: To begin, open the Control Panel.
Step 2: Next, pick View network status and tasks from the Large Icons menu under Network and Sharing Center.
Step 3: Next, select Change Adapter Settings from the drop-down menu.
Step 4: Next, right-click Network and Internet and choose Properties.
Step 5: Now let’s go on to the next step; select Internet Protocol Version 4 (TCP/IPv4) and then Properties.
Step 6: Next, choose Automatically obtain an IP address and Automatically obtain a DNS server address.
Step 7: To alter the settings, click OK.
Step 8: Also, for Internet Protocol Version 6 (TCP/IPv6), repeat the previous procedures.
Step 9: Finally, restart your computer to see if your problem has been repaired.
If this technique does not solve your problem of ‘Windows Can’t Communicate With The Device or Resource,’ you can try other solutions to avoid the Windows Can’t Communicate With The Device or Resource error.
Method 2: Use Google Public DNS
Another possible cause of this problem is DNS; you can manually update your DNS. You can resolve this issue by switching to Google’s public service and checking whether or not the connection works. You can undo the changes by doing the following steps:
Step 1: To begin, open the Control Panel.
Step 2: Next, select Large Icons and then Network and Sharing Center from the drop-down menu.
Step 3: Next, select Change Adapter Settings from the drop-down menu.
Step 4: Now pick Properties from the drop-down menu next to the network you’re using.
Step 5: Now let’s go on to the next step; select Internet Protocol Version (TCP/IPv4) and then Properties.
Step 6: After that, be sure to use the DNS server addresses shown below. Then, in the Preferred DNS server box, type 8.8.8.8, and in the Alternate DNS server box, type 8.8.4.4.
Step 7: Finally, click OK to save your changes.
Step 8: Finally, restart your computer to see if the problem has been resolved.
You can use the same technique to manage the Internet Service Provider’s other DNS servers. Also, request a DNS servers list from your Internet Service Provider, which will be executed on the network.
Furthermore, if you are receiving popups stating that you are unable to communicate with your network or resource, the problem is most likely caused by a network. Your Network Administrator should be contacted.
If the switching process does not solve the problem of Windows being unable to interface with the device or resource, look for another solution.
Method 3: Clear DNS Cache
Another cause of the error text “Windows can’t communicate with the device” is a faulty or incorrectly configured DNS cache. Your computer’s IP and DNS can be flushed. The following steps can be used to clear the cache:
Step 1: In the search box, type the command prompt. Then, on the command prompt, right-click and select Run as administrator.
Step 2: Then, one by one, write the following commands and press Enter.
/flushdns ipconfig
/registerdns ipconfig
/release ipconfig
/renew ipconfig
Step 3: After completing the task, quit the command window and restart your computer. Check to see whether the issue has been resolved.
Is your problem now resolved? If not, don’t worry; simply try a different way.
Method 4: Modify The Hosts’ File
A hosts file is one of the possible causes of Windows Can’t Communicate With The Device or Resource. This manoeuvre will solve your problem by modifying the hosts file. Take a look at the steps below:
Step 1: Go to C:WindowsSystem32driversetc and open it.
Step 2: Next, open Notepad and open the Hosts file.
Step 3: Delete the entire contents of the file now.
Step 4: To save the file, press the Control key and S at the same time (Ctrl + S).
Step 5: Finally, check to see if the problem has been resolved.
Read Also:
Conclusion
We hope one of these ways may assist you in resolving the Windows Can’t Communicate With The Device or Resource problem on your Windows PC. Take pleasure with your internet connection!
