DNS_Probe_Finished_Bad_Config is a common issue that Google Chrome users encounter. And it has been experienced by a vast number of people.
The DNS_Probe_Finished_Bad_Config problem generates a blank screen in Google Chrome when the user attempts to browse a website, and you will be unable to surf the internet as a result.
Contents
DNS Probe Finished Bad
A fault with the Domain Name System (DNS) server is causing the configuration issue. It happens independent of the Chrome or Windows version you’re using. A change in your network settings is one of the most common reasons of this problem.
These changes can occur as a result of a recent programme installation, a system update that addressed network settings that fouled things up, or plain old human error.
Read Also:
How To Resolve The DNS_Probe_Finished_Bad_Config Problem
These DNS Servers are important, but fortunately, they can be resolved. And that is exactly why we are here. Today, we’ll show you seven approaches for resolving DNS Probe Finished Bad Config that we’ve tried and tested.
Take a peek at them in the gallery below. These are the solutions that will assist you in quickly resolving the DNS Probe Finished Bad Config issue.
Solution 1: Manually Configure DNS
The DNS Probe Finished Bad Config issue may be resolved by manually configuring DNS servers. To do the same, follow the steps below:
Step 1: Press Windows Key + R at the same time.
Step 2: When the Run dialogue box appears, input ncpa.cpl and press Enter.
Step 3: You should now see the Network Connections window.
Step 4: Right-click on your connection in these windows and select Properties.
Step 5: Select Properties.
Step 6: Select Internet Protocol Version 4 from the drop-down menu, then click Properties.
Step 7: Select Use The Following DNS Server from the Internet Protocol Version 4 window.
Step 8: In this box, type the following values:
8.8.8.8 is the preferred DNS server.
8.8.4.4 Alternate DNS Server
Step 9: Select Validate Settings Upon Exit from the drop-down menu.
Step 10: When you click OK, your settings will be saved.
Step 11: Restart your computer and check to see if the problem has been resolved.
Solution 2: Reset IP Configuration
This procedure will assist you in clearing the IP Addresses catalogue on the internet, which may be the source of the issue. Follow the steps below to get started:
Step 1: Open the Run dialogue box by pressing Windows Key + R.
Step 2: Press Enter after typing cmd.
Step 3: In the Command Prompt, type the following commands one by one, pressing Enter after each one:
int ip reset netsh
reset winsock netsh
/flushdns ipconfig
/renew ipconfig
Step 4: After you’ve completed the steps above, restart your computer to see if the DNS_Probe_Finished_Bad_Config problem has been resolved.
Solution 3: Delete Cookies, Temporary Files, and Cache
It affects the browser’s performance and can cause DNS_Probe_Finished_Bad_Config problem, just as temporary files collect and become corrupt. To clear the data in the Chrome browser, follow the steps below:
Step 1: Go to Chrome and open it.
Step 2: Click the three dots in the upper-right corner, then Settings.
Step 3: Now type Clear Browsing Data in the top search box.
Step 4: Select the option to Clear Browsing Data.
Step 5: Finally, select Clear Data.
Step 6: Relaunch Chrome.
The DNS_Probe_Finished_Bad_Config error should now be resolved, and you should be able to browse the internet without any problems. If that doesn’t work, try one of the alternative methods listed below.
Solution 4: Update Network Drivers
Updating Network Drivers is usually beneficial because the most recent version of the Drivers always include performance and bug fixes. Follow these steps to achieve the same result:
Step 1: From the Start menu, type Device Manager into the search box.
Step 2: Go to the Device Manager and click on it.
Step 3: Look for any Yellow Exclamation Marks under Network Adapters.
Step 4: Right-click on the driver in question.
Step 5: Next, select Update Driver.
Step 6: Wait for the procedure to complete and then check to see if you can access the website again.
Solution 5: Turn Off Your Firewall
If it’s labelled as a harmful site in their database, anti-virus software or website blockers could be the source of the problem. You may need to disable all of them to see whether the problem is resolved.
Each anti-virus programme has its own set of instructions for disabling it. However, if you’re using Windows Defender, here’s how to turn it off:
Step 1: Open the Start menu and type Defender into the search box.
Step 2: Select Windows Defender Security Center from the left-hand menu.
Step 3: Select Virus and Threat Protection from the drop-down menu.
Step 4: Select Real-Time Protection from the drop-down menu and disable it.
And with that, you’ve turned off Windows Defender. You may need to perform the same thing with the Firewall, so here are the instructions for that as well.
Step 1: Open Control Panel by going to Start and searching for it.
Step 2: Select System and Security, then Windows Firewall.
Step 3: Select Turn Windows Firewall On and Off, then Turn Windows Firewall Off.
Step 4: Now that you’ve disabled both of them, see if the DNS_Probe_Finished_Bad_Config error still occurs.
Solution 6: Disconnect and Reconnect
Disconnecting and reconnecting to your router is also a good technique to solve the problem because it clears the network of any complexities. To do the same, follow the steps below:
Step 1: Go to the taskbar and look for the WiFi icon (it may be hidden, press on the small arrow to bring it up).
Step 2: From the list of networks, select the network to which you are currently connected.
Step 3: Next, select Disconnect.
Step 4: Restart your router from the power outlet after you’ve disconnected.
Step 5: Reconnect to your network and check to see whether the DNS_Probe_Finished_Bad_Config issue has gone away.
Solution 7: Change Your Browser
If none of the previous solutions worked for you, it’s possible that there’s a problem with your browser. And if this happens, it affects not only you, but everyone else who uses that browser.
Once, try reinstalling your browser. If this does not resolve the DNS_Probe_Finished_Bad_Config error, you may need to switch to another browser, such as Firefox or Microsoft Edge, until the issue is resolved with a browser update in the one you were using earlier.
Read Also:
Conclusion
So those were the top seven solutions we found for the DNS_Probe_Finished_Bad_Config problem. These faults are unavoidable and are built into the software. We hope you were able to find a solution that works for you. Please let us know if you require assistance with any additional mistakes.
