How To Fix ‘Reboot and Select Proper Boot Device’ Error

Error
Error

Reboot and Select Proper Boot Device error message that appears when we start our operating system is Reboot and Select Proper Boot Device. It’s a BIOS-related issue. The BIOS chip begins your operating system, and if it cannot recognise a hard drive or solid-state drive, an error message appears.

How To Reboot and Choose The Correct Boot Device Error

It can be caused by a malfunctioning or weakly attached hard disc drive (HDD), the ability to enable or disable Legacy Boot, or an inactive partition.

Error
Error

Alternatively, the boot order may be incorrect. But don’t be concerned. The remedies listed below will resolve the Reboot and Select Proper Boot Device problem.

Read Also:

  1. System Service Exception
  2. Microsoft Compatibility Telemetry
  3. System Thread Exception Not Handled

Solution 1: Double-check The Boot Order

Step 1: First, restart your computer and press the Delete key.

Step 2: Next, look for the Boot tab and click it.

Step 3: Change the order with the + and – keys, keeping the computer hard disc first.

Step 4: Finally, save your modifications and restart your computer.

Solution 2: Verify UEFI Boot

Step 1: First, restart your computer and press the Delete key.

Step 2: Find Legacy Boot and double-click it.

Step 3: Toggle the option to Enable if it is disabled, or Disable if it is enabled.

Step 4: Save your changes and exit the menu.

Step 5: Restart your computer’s operating system.

Solution 3: Make Sure Your Hard Disc Drive (HDD)

This issue is usually caused by a lost or defective connection. If your laptop/PC is still under warranty or you lack technical competence, take it to a service centre instead of opening it yourself. Make an appropriate connection by opening the case. Finally, reboot, and the issue will be resolved.

Solution 4: Use Diskpart 

Step 1: To begin, go to the Start menu.

Step 2: Then, in the search box, type Run and press the Enter key.

Step 3: Next, put cmd into the Run window and press the Enter key.

Step 4: Type the following commands in the command prompt window, remembering to press Enter after each instruction.

choose a disc 0 partition list
pick active partition 1 exit

Step 5: Restart your computer’s operating system.

Solution 5: Replace The CMOS Battery

A circular cell called a CMOS battery saves various faults and issues. To eliminate any leftover charge, just remove the CMOS battery and hold the power button for at least 30 seconds. Now swap out the old battery for a new one.

Solution 6: Reinstall Windows

Reinstalling Windows is the final option. It takes some time, but it’s worth it because it fixes the Reboot and Select Proper Boot errors.

Read Also:

  1. No Internet Secured
  2. ERR_CONNECTION_CLOSED
  3. How To Delete Bookmarks on Mac

Conclusion

Finally, the procedures listed above will resolve the “Reboot and select correct boot device” issue message. If you have any questions or recommendations, please submit them here.