How To Fix ‘This Site Can’t Be Reached’ Error in Google Chrome

This Site Can't Be Reached Error in Google Chrome

If you are busy searching for some information for your project work or any other important work and then all of a sudden, you encounter an error while searching such as This Site Can’t Be Reached, then this tends to interrupt your ongoing work.

This Site Can't Be Reached Error in Google Chrome

There are possibly many reasons like your DNS server may not respond, Chrome unable to run on the latest version, TCP/IP is unable to connect to the Internet, and many other issues can cause the error to occur.

Well, a few methods will help you solve This Site Can’t Be Reached error. Follow the below-mentioned methods to fix This Site Can’t Be Reached error.

Read Also:

  1. nvlddmkm.sys
  2. Modern Setup Host
  3. Steam Missing File Privileges

How to Fix This Site Cannot Be Reached Error in Chrome

Here are the 7 different solutions to the error. Go through the below methods that will help you to solve your issue.

Method 1: Reset the Chrome Browser Settings

At times the error may occur due to settings, hence resetting your browser settings to default will solve your problem. Follow the below-given steps to resolve your This Site Can’t Be Reached.

Step 1 – Firstly, Open your Google Chrome browser.

Step 2 – Type chrome://flags in the above address bar.

Step 3 – Then, Click on Reset all to default situated beside the search box.

Step 4 – Now, restart your system. This Site Can’t Be Reached error will be solved now.

Must Read:

  1. DNS_Probe_Finished_NXDomain Error
  2. Application Error 0xc0000142

Method 2: Change Maximum Allowed TLS Version

Step 1 – Firstly, open your Google Chrome.

Step 2 – Type chrome://flags in the above address bar.

Step 3 – Scroll down and look for Maximum TLS version-enabled. Or else you can even search Maximum TLS version-enabled in the given search box.

Step 4 – Set the version of TLS to TLS 1.3. These changes will set the settings state to default.

Step 5 – Restart your computer now.

Once the settings are set to default, then the following changes will take up. Go back to the page which was giving an error This Site Can’t Be Reached will be error-free now. Now you can search the webpage without any errors.

Method 3: Disable Experimental QUIC Protocol

QUIC protocol stands for Quick UDP Internet Connection. QUIC protocol kept ups a set of many connections over UDP and was designed to provide security protection equivalent to TLS/SSL, along with reduced connection and transport latency.

Step 1 – Firstly, open your Google Chrome.

Step 2 – Type chrome://flags in the above address bar.

Step 3 – Scroll down and look for the Experimental QUIC Protocol. Or else you can even search Experimental QUIC Protocol in the given search box.

Step 4 – Click on default, and drop-down options appear. Select Disabled within it.

Step 5 – Restart your computer now.

After restarting open the chrome and revisit the webpage and the error This Site Can’t Be Reached will be solved till then.

Method 4: Reset TCP/IP Stack

If you are unable to connect to the Internet, your Internet Protocol or TCP/IP may have been corrupted, and you may have to reset TCP/IP. One of the core components required by your Windows computer to connect successfully to the Internet is TCP/IP. Try the steps to reset TCP/IP stack, which helps you get to connect to the Internet, and you will get the error This Site Can’t Be Reached.

Step 1 – Go to the Start Menu.

Step 2 – Search for command prompt in the search box.

Step 3 – Right-click on it and select on Run as administrator option.

Step 4 – Type the given commands one after the other. Hit enter after each command.

  • ipconfig /release
  • ipconfig /all
  • ipconfig /flushdns
  • ipconfig /renew
  • netsh int ip set DNS
  • netsh winsock reset

Step 5 – Restart once you finished typing the commands in the command prompt. The changes will take place after restarting. It will solve This Site Can’t Be Reached error.

Method 5: Restart DNS Client

DNS helps to convert domain names to IP addresses. DNS clients can be the issue sometimes. Therefore, restarting your DNS Client can also help address this issue. Perform the following steps to get rid of This Site Can’t Be Reached error.

Step 1 – Go to the Start Menu

Step 2 – In the search box search for “Services” option.

Step 3 – Right-click on it and select on Run as administrator option.

Step 4 – Services window will open up. A list of many services will be displayed, select DNS client among all the services.

Step 5 – Right-click on DNS client, a drop-down menu appears then, click on Restart option. Or on the right side of the panel Restart option is displayed, click on that.

Step 6 – Now, close all your windows and restart your computer. Open Google Chrome go to the webpage, which was giving an error. This Site Can’t Be Reached error will be solved until now.

Method 6: Change Your IPV4 DNS Address

The Internet Service Provider also supplies the required network settings (including the Domain Name System (DNS) addresses) while signing up for Internet access, which helps you to load your favorite websites.

Sometimes, DNS servers slow down, which creates an error of This Site Can’t Be Reached. Changing your IPV4 DNS address will help you solve the error of This Site Can’t Be Reached. Go through the following steps and fix the error.

Step 1 – In the beginning, go to the Taskbar and click on the Network icon.

Step 2 – Select on Open Network and Sharing Center.

Step 3 – Click on your Network Connection.

Step 4 – Hit on Properties option at the bottom.

Step 5 – Then double-click on Internet Protocol Version 4 (TCP/IPv4) option.

Step 6 – Internet Protocol Version 4 (TCP/IPv4) properties window will open up.

Step 7 – Then, enter this Google public DNS server address:

8.8.8.8

8.8.4.4

Step 8 – Check the Validate settings upon exit box. Then Click on, OK.

Step 9 – Restart your computer. The following changes will take place. Open the webpage in your Google Chrome, and it should work now.

Method 7: Reinstall Chrome

If all the above methods fail, you can try this method by reinstalling Google Chrome. This method will solve This Site Can’t Be Reached error.

Step 1 – Press Windows Key + R to open the run box.

Step 2 – Type “Control panel” in the given search box.

Step 3 – On the Programs option Uninstall a Program option is present, select that.

Step 4 – Now, navigate to C:\Users\%your_name%\AppData\Local\Google\ and delete everything inside this folder.

Step 5 – Go to the official Google Chrome website to download Google Chrome Browser again on your computer.

Step 6 – Run the Download newly Google Chrome and check whether you can reach your required webpage without the error of This Site Can’t Be Reached.

Also Read:

  1. Your Connection is Not Private in Chrome
  2. NVIDIA Control Panel Missing in Windows 10, 8, 7
  3. ERR_CONNECTION_TIMED_OUT Error in Chrome

Conclusion

Well, those were some methods and steps that will help you solve the issue of “This Site Can’t Be Reached.”  The error might be stressful if you need some information urgently, but don’t worry, it is pretty simple to crack the error with some steps. Patiently go through them, and you are good to go then.