How To Fix ‘System Thread Exception Not Handled’ Error

Error
Error

The System Thread Exception Not Handled Issue is a common error that happens during the booting process of Windows 8 and Windows 10. It is caused by obsolete or incompatible drivers.

There is a free programme called WhoCrashed that will assist you locate the bad drive. It is very unpredictable since this mistake might occur at any time during the startup of the computer or while working. is a transient problem that prevents Windows users from logging in.

The blue screen of death will appear with the error code System Thread Exception_ Not _Handled when this error occurs. It is impossible to operate on the computer because this error occurs frequently during boot up and causes the computer to become trapped in a reboot loop.

Error
Error

This error code is usually accompanied by numbers such as 0x00007E, 0x100007E, and if you’re lucky, a file name that specifies which graphic driver is generating the error, such as atikmdag.sys, nvlddmkm.sys, igdkmd64.sys, and so on.

Read Also:

  1. Kernel Security Check Failure
  2. Windows Modules Installer Worker
  3. How To Delete A Download on Mac

How Do I Fix The Error “System Thread Exception Not Handled”?

Because this problem prevents the computer from even starting up, it’s critical to address it as soon as possible to ensure the system’s proper operation.

The first step in resolving the error is to enter safe mode and break the reboot loop. If it doesn’t work, there are more options for resolving the System Thread Exception Not Handled problem, such as:

Method 1: The Dilemmatic Driver Is Renamed

When the error code system thread exception not handled is accompanied by a file name rather than numbers, such as atikmdag. sys or igdkmd64.sys, the file name should be renamed so that Windows creates a new copy of the driver file and reinstalls it to remove the error.

But you must first know which hard drive the driver was installed on. To rename the incorrect file, follow these steps:

Step 1: Open File Explorer and insert the Windows Recovery Drive or Repair Disk from the Start menu.

Step 2: Select Next after selecting the preferred language.

Step 3: Click the Repair button on the left bottom of the screen.

Step 4: Select Troubleshoot and Advanced Options from the drop-down menu.

Step 5: Go to Command Prompt and type the following command to change the “.sys” file to “.old”:

system32drivers C:cdwindows

FILENAME.OLD FILENAME.sys ren FILENAME.sys

Step 6: Finish by typing Exit and restarting the computer.

There’s one more option.

Method 2: Immobilize Hardware Acceleration 

Hardware acceleration is a technique in which the hardware is compelled to work quicker than the general CPU’s standard computing.

If determining the reason of the BSOD becomes challenging, the best remedy is to temporarily disable hardware acceleration, which can cause freezing and crashes.

Disabling hardware acceleration differs by browser; Chrome, Mozilla Firefox, and Internet Explorer each have their own set of instructions for disabling hardware acceleration. The procedures to disable hardware acceleration in Chrome are as follows:

Step 1: Go to Google Chrome and open it.

Step 2: In the address box, type chrome:/flags and hit Enter.

Step 3: Select Show Advanced Settings from the Settings menu.

Step 4: If necessary, uncheck the Use Hardware Acceleration box.

Step 5: Check the outcome by restarting the computer.

Method 3: Remove The Faulty Driver 

When we know what the issue driver is, we can uninstall it to avoid the error, which is caused by outdated or incompatible faults, and then reinstall or update the driver. If the driver is preventing the system thread exception from dealing with the error.

It will not allow the computer to start and work, and the only option will be to uninstall the troublesome driver and reinstall it to resolve the malfunctioning or reoccurring difficulties.

Reinstalling the drive will make it brand new and ready to use. To uninstall the driver, you must take the following steps:

Step 1: To open the Run box, press Windows + R.

Step 2: Click OK after typing “cmd.” Use the Command Prompt to get started.

Step 3: Type the following command:

legacy bcdebit /set default bootmenupolicy

Step 4: To activate legacy advanced boot, press enter.

Step 5: Press the Enter key and restart the computer.

Step 6: Press the F8 key to access the Advanced boot options panel.

Step 7: Once you’ve reached the Advanced Boot Options page, select Safe Mode to gain access to your Windows PC.

Step 8: A Run box will open; type devmgmt. msc into it and click OK.

You’ll go into Device Manager, find the problematic driver, and uninstall it using the right-click menu. Click the OK button.

After the installation is complete, go to the manufacturer’s website and download the most recent driver, then restart the computer.

Method 4: Restoring Your Computer to a Previous State

If you’ve tried reinstalling and updating but still haven’t solved the problem, the last option is to restore the system.

Restoring Windows will help it return to its original state. It’s a good idea to double-check the backup before restoring because restoring can result in data loss. When installing new software, try to restore the points each time.

Before any system modification, Windows 10 offers a feature that automatically restores the system points. A system repair disc can be used to restore the system. The steps for recovering the system are as follows:

Insert the System Repair Disk into your computer and select the language you want to use.

Step 2: Select Repair from the drop-down menu, then Troubleshoot and Advanced Options from the drop-down menu.

Step 3: Choose a System To restore the PC, select Restore from the advanced options menu and follow the on-screen instructions.

Step 4: Restart the computer to see if the problem is still present or has been resolved.

Read Also:

  1. Kmode Exception Not Handled
  2. How To Delete a Slack Channel
  3. Reboot and Select Proper Boot Device

Conclusion

The System Thread Exception Not Handled Problem is a typical blue screen of death error that occurs when something goes wrong or when drivers are obsolete, among other things.

A simple remedy to this problem is to reboot the system (the system may automatically reboot), restart the loop, or reinstall the defective driver.

When you understand the origin of the issue and the part where the fault is located, finding a remedy becomes much easier. It’s a lot easier when the problem is related to the file name. It is difficult to resolve this problem, however there are several options available.