When you use any form of tab, Windows tries to find some portion of data in your system’s memory, as you may know. If your Window is unable to locate the data, you may receive the error PAGE FAULT IN NONPAGED AREA. This mistake will appear in blue on your screen.

Blue Screen of Death is another name for this problem (BSOD). When your window is unable to locate the data, it reboots your computer to prevent it from further damage. That particular block of data is mostly stored on the hard disc or in the RAM of your computer.


In most circumstances, this error is caused by a problem with your RAM or the RAM’s connection to your motherboard. However, there are a variety of ways you can try to resolve this issue.

Also, if you have anti-virus software on your device to protect it from corrupted websites, it has a number of drawbacks, since it could be one of the sources of this problem. It is recommended that you disable it before attempting the solutions listed below.


If you’re having the same problem and want to find the best potential solution, you should read and try the following suggestions:

Solution 1: Make a New Page File

If you want to get rid of this issue, this is the first and most important option you can try. Disk space is used to speed up your system.

To speed up the system, your window uses the disc space on your hard disc and produces a page file on your device. The problem is that you must regenerate this page file in order to resolve this issue.

Step 1: First and foremost, you must disable this page file. To do so, press and hold the Windows Key while pressing R. Then paste SystemPropertiesAdvanced.exe into the Run dialogue box and click Enter to open it.

Step 2: Next, go to System Properties, select the Advanced tab, and then click Settings under Performance.Then, from the new window that appears, select Advanced once more.

Remove the check mark from the option that says “Automatically manage paging file size for all drives.”

Step 3: Finally, click Set after selecting No paging file. Confirm any warning messages that appear on the screen. Then, to close all the windows, click OK > OK > OK. Restart your computer after it’s finished.

Step 4: To return to the virtual memory, restart your device and repeat all of the previous procedures. Select System managed size from the drop-down menu and click Set. You should also tick the box at the top that says “Automatically manage paging file size for all discs.”

Step 5: Next, press OK > OK > OK to close all windows and restart your computer. After you’ve completed and followed all of the steps above, double-check to see if all of the corrupted and chunked data and files have been removed. If it isn’t, and you’re still getting the same issue, you should try the next option.

Solution 2: Run The chkdsk Command

You must execute chkdsk to put this solution into action. Essentially, chkdsk is a form of disc that will examine the programme in your Windows that is used to search for and rectify file system issues.

Step 1: To begin, go to Start, type cmd, right-click on it, and select the Run As Administrator option from the menu that appears.After that, simply type chkdsk /f /r and hit Enter.

Step 2: It will begin to run. If the notice “The drive is locked and if you would like to plan a chkdsk on the next restart, then you must enter in Y which signifies yes” appears after some time, type Y and click Enter.

Step 3: Now you must restart your computer and execute chkdsk. This will assist you in erasing all of the data chunks as well as resolving the problem.

Finally, you should check to see if the error has been resolved. If that doesn’t work, try the other option.

3. Run System Restore 

Step 1: Press and hold the Windows key while pressing R to start the system restoration. Then, in the Run dialogue, type rstrui.exe and press the Enter key.

Step 2: Check the date and time of the Restore points now. Then you must select Next > Finish. Finally, you must follow all of the directions displayed on the screen.

4. Update Windows

Updating Windows is a critical stage in the process. It not only fixes the issues, but it also keeps your device safe and up to date. To resolve this issue, check to see if your window has been updated.

Windows 7 and Windows 8

To begin, press the Windows key and type check for updates into the search box. Then, under the search results, click Check for updates. Allow your computer to check for updates now. If there are any remaining updates, you should install them and upgrade your Windows.

For use with Windows 10

To do so, use Windows Key + R and type ms-settings: windows update, then press Enter.Now you must check for updates, and if any are available, you should install them.

Solution 5: Driver Interference 

To begin, go back to solution 4 from the previous section. Solution 4 requires you to maintain your Window up to date. After that, you must run the Driver Verifier to ensure that no other driver is interfering with the installation and creating this issue.

Solution 6: Run a Scan Using SFC

Here, you must perform the SFC scan, which will assist you in eliminating all types of corrupted files and correcting any faults that you may be experiencing. This is primarily for Windows 10, but it may also be used with Windows 8 and 9.

Solution 7: Windows Memory Diagnostics

As you may be aware, RAM is a critical component of your computer, and if it malfunctions, it can result in a slew of issues. To achieve this, hit R while holding down the Windows key.

Then, in the Run dialogue, type mdsched.exe and press the Enter key. On your screen, a dialogue box will display, asking if you want to reboot and check RAM now or later. You can choose the option that appeals to you the most.

When you press the Reboot button, the RAM check will begin. It is recommended that you check your RAM if it displays any form of issue. If you’re using a laptop, your RAM will be located in a little compartment near the bottom. If you have a desktop computer, you can carefully open your CPU.

If you want to clean it, you should use a toothbrush. If you’re still getting the error after cleaning both RAM modules, it’s possible that the problem is with the motherboard. After that, you should send your laptop or desktop in for hardware repair and diagnosis.


It is recommended that you read the entire page to learn everything there is to know about PAGE FAULT IN NONPAGED AREA problems. The solutions to the problem are also listed above. If you’re having the same problem, read through all of the suggestions above and try them out.