The screen that appears after a fatal error occurs and the computer can no longer be utilised is known as the Blue Screen of Death (BSOD). You’ll require it. Restart.
These displays typically offer information about why they occurred as well as error messages or codes to assist you in investigating and resolving the issue.
The actual issue arises when these BSODs occur frequently and the machine is unable to function correctly. You could also try to solve the problem yourself. Let’s see what the next BSOD turns out to be!
- 1 Blue Screen of Death CLOCK WATCHDOG TIMEOUT
- 1.1 1. Stopping CPU Overclocking
- 1.2 2. Use the Windows Driver Verifier Tool
- 1.3 3. Check Your Hard Drive
- 1.4 4. Run The Memory Diagnostics programme in Windows
- 1.5 5. Fix Outdated External Devices and Drivers
- 1.6 6. Switching Your Sounds to External Speakers
- 1.7 7. Check Your System Files with System File Checker
- 1.8 8. Upgrade Your BIOS
- 1.9 9. Determine If The CPU is Defective
- 1.10 10. Giving IT Professionals a Kernel Dump
- 1.11 11. Reset The BIOS To Its Factory Settings
- 1.12 12. Remove Virtual Image Manager
- 1.13 13. Avoid Overheating Your Computer
Blue Screen of Death CLOCK WATCHDOG TIMEOUT
This error message causes the machine to freeze and requires a complete reboot to get it working again. On Windows 10, BSOD is a little less intimidating and user-friendly, but it’s still a severe issue.
All users working on key files and documents may lose them forever if the problem occurs, as all files executing at the time of the error may be corrupted.
There are various ways to tackle this difficulty, but they all need careful attention to the instructions.
1. Stopping CPU Overclocking
These faults are frequently caused by CPU overclocking. First and foremost, you should be aware that the CLOCL WATCHDOG TIMEOUT BSOD is typically triggered by a processor issue. You should double-check this.
Overclocking is the process of increasing the frequency and speed of a processor beyond its factory settings. This will greatly boost the performance of your PC, but you must be extremely cautious since overclocking or negligence on the part of the user might result in the entire PC being burned.
The programme that was originally overclocked determines how to restore the CPU rate and frequency to its original state. There are plenty of tools to pick from, including Intel and AMD’s own downloadable software for overclocking the CPU.
2. Use the Windows Driver Verifier Tool
Malicious code is used by Driver Verifier. For Windows kernel mode and graphics drivers, function calls or other approaches that can destroy system files. If you’re a part of the Windows operating system’s toolkit. Diagnose. This method discovers all non-Microsoft unsigned drivers and tries to validate or remove them.
Step 1: Open the tool as an administrator by going to the Windows menu and typing Verifier. As an administrator, launch Verifier. Click Next after selecting the option for which you want to make a default setting.
Step 2: Choose Create Default Settings from the drop-down menu. Click Next after selecting the Automatically choose unsigned driver option. A notice appears claiming that no unsigned drivers were discovered.
Step 3: Select an unsigned driver automatically. Make a default and then move on to the next step. Choose a driver from the drop-down menu and click Next.
Choose a driver from the list. To show the vendor as unknown, select all drivers and click Finish. To make the supplier unknown, choose all the drivers.
Your computer will need to be restarted. Reopen Driver Verifier after rebooting, then pick the Remove existing settings option and click Finish. Existing settings are erased when you use the Checker. Now is the time to restart your computer.
3. Check Your Hard Drive
Use the command prompt to detect and rectify logical file system issues on the device in this manner. Use the CHDSK command to check your system. Depending on the type of file system partition, this works.
Attempt to correct both logical problems and to recover all legible data that may have been corrupted as a result of faulty sectors on your hard disc. This can take anywhere from a few minutes to an hour.
Step 1: Log in as an administrator and open a command prompt. chkdsk / f / r E is the command to use. (Insert the drive letter you want to troubleshoot in lieu of E.) From a command prompt, type chkdsk.
Step 2: If another software is presently using the Volume, restart the computer after this procedure is finished. The error will be checked when you restart your computer.
4. Run The Memory Diagnostics programme in Windows
Watchdog for the Clock Timeout errors can also occur when the computer’s Random Access Memory (RAM) is incompatible.
Windows 10 includes a programme called Windows Memory Diagnostics that analyses the RAM for possible errors. After rebooting the device, Windows memory diagnostics run and can take several minutes to complete.
Open Windows Memory Diagnostics by going to the Start Menu and typing it in. Start the Windows Memory Diagnostics programme. Select the option to restart now, and the computer will automatically scan for problems while restarting.
5. Fix Outdated External Devices and Drivers
This is by far the most common cause of all BSOD issues. Outdated drivers and incorrectly configured external devices such as a mouse, keyboard, webcam, and printer can quickly cause device instability, and it’s no wonder that these errors repeat themselves every few hours or minutes.
Step 1: If you are willing to invest a few times, this can be done without difficulty on a regular basis. Open Device Manager by looking for it in the Search bar, which you can access from the Start menu. Allow the option to “Show hidden devices” by clicking on View.
Step 2: Next, check the tool manager for devices that display an error message after making a call. Expand all menus by clicking the arrow next to their name, and keep your search going.
The fault lies within the Universal Serial Bus controllers with an error of their call in 90% of all BSODs caused by hardware, according to Microsoft.
USB Device Unknown (Device Descriptor Request Failed)
Step 3: With your computer turned off and Device Manager open, remove USB devices one at a time (mouse, keyboard, webcam, etc.).
When you remove the hardware component that caused the BSOD, the error Unknown USB Device should disappear.
Step 4: Whether it still doesn’t work, reconnect all of your devices, uncheck the “Show hidden gadgets” option in the View menu, and check to see if the Unknown USB Device appears.
If this is the case, disconnect each device one at a time until the problem is resolved. If you’ve been following the commands correctly, you should have figured out which of your external devices is causing the BSOD.
Step 5: Double-check that the hidden gadgets are visible. Disconnect the complex tool, locate it within the Universal Serial Bus controller, right-click on it, and select Uninstall tool. Restart your computer and check to see if the issue has been repaired.
As far as the troubled tool is concerned, you should be able to reinstall the most recent motive force for it by googling the tool’s name and obtaining it from the manufacturer’s website.
6. Switching Your Sounds to External Speakers
If you have a computer or a pc with two audio systems (inner and external), this problem may occur when Windows tries to switch between the two audio systems. This may be constant with no issues, but after removing the alternate pair, you may not be able to use your internal audio system.
Step 1: Select Playback gadgets from the right-click menu on the Volume symbol in the lower proper a part of your taskbar. To open the sound settings, make sure you’re on the Playback tab.
Step 2: Right-click on the pair of audio systems you wish to disable and select Disable from the menu that appears.
Make sure your other speakers are working properly because you won’t be able to play sound if they all stop working. Check to see whether the problem persists after restarting your computer.
7. Check Your System Files with System File Checker
We can utilise Windows File Checker as a System Utility to restore broken or corrupt Windows documents on the system using this way. It is a built-in feature in all recent versions of the Windows Operating System.
It allows you to repair broken or corrupt Windows documents from within the system. You must run cod in accelerated mode in order to run SFC (with administrator privileges).
Step 1: Type cod and open command spark off as administrator in the hunt menu. Type sfc /scan now in the Command Prompt Window and click Enter to run the command.
Now do a sfc scan.
Step 2: The System File Checker will start walking around to check the integrity of all of the gadget documents and, if any are found to be corrupt, will attempt to restore them. When the SFC has finished scanning the device, one of the following messages will appear:
No integrity violations were discovered by Windows any longer.
Windows Resource Protection found and fixed corrupt documents.
Windows Resource Protection identified corrupt documents but became unable to restore a few (or all) of them (no longer a good thing).
If you get the first or second message, it means that there were either no damaged documents discovered at the device or that if there were, they were consistent.
8. Upgrade Your BIOS
The Basic Input-Output System (BIOS) on a computer’s motherboard is an embedded software programme. It is the major software package that your PC loads in order for it to be able to use CD drives, mouse, and keyboards almost immediately after you turn it on.
Step 1: Updating BIOS allows you to fix specific BSOD issues, as any inconsistency in BIOS settings will prevent your PC from walking or running normally. Take a look at the commands listed below!
Step 2: Type misinform into the Start menu’s Search bar to get the most recent version of BIOS you’ve installed for your computer. Locate the BIOS model just beneath your Processor version and copy or rewrite everything to a textual content document or a piece of paper.
Step 3: Determine whether your computer became packed, pre-built, or manually made by purchasing all components separately.
This is critical since you don’t want to use BIOS designed for one aspect of your PC when it won’t work for your other devices, and you’ll end up overwriting the right BIOS with the wrong one, resulting in common errors and gadget problems.
Make sure your computer is ready for the update. Make sure your laptop’s battery is completely charged and plugged in before updating it.
We recommend using an uninterruptible power supply (UPS) when updating your computer to avoid the computer turning down due to a power outage during the upgrade.
Follow the instructions for the various desktop and laptop manufacturers. Lenovo BIOS update, Gateway BIOS update, HP BIOS update, Dell BIOS update, and MSI BIOS update are all examples of BIOS updates.
9. Determine If The CPU is Defective
It may be time to replace the CPU if it is defective and contains a bug. This is a pricey buy, but it’s well worth it if you want to keep your computer stable.
Check the CPU with a skilled IT specialist and remove it if something goes wrong. If that’s the case, pay attention to recommendations for the optimum model for your setup.
10. Giving IT Professionals a Kernel Dump
IT experts can use the Windows Debugger to read kernel dumps. This debugger shows you exactly where the problem is and how to repair it right away. The command prompt makes it simple to use the tool.
Step 1: To open a command prompt, first search for one in the search box, then right-click and select Run as administrator. Copy and paste the command below into the command prompt, then press Enter. standard / all / verifier.exe
Step 2: A blue screen appears, and the log files are saved in the C: Windows Minimums folder. Although opening this file can be difficult, Microsoft tools are available for free download from this website.
It’s under the Debugging Tools for Windows (WinDbg) section, under Get Debugging Tools for Windows (WinDbg) (from SDK).
Step 3: If you don’t want to use any other components after downloading the SDK file, use the installation wizard to disable everything except the Windows debugging tools.
After the installation is complete, locate and run the windbag tool. Find the minimal file in the C: Windows Minimum folder by going to File> Open Crash Dump.
Step 4: Look for the line “Probably the cause” at the end of the resultant file. This is an excellent sign of which driver is the source of the issue. To uninstall this driver from Device Manager, right-click on it and select Uninstall Device.
Make sure this device is turned off ahead of time. You don’t have to download and install it yourself, so if you’re short on time, just click the Update Driver button.
11. Reset The BIOS To Its Factory Settings
If your BIOS is already up to date, or if you’re concerned that something will go wrong during the installation process and leave your PC bricked, restore the BIOS settings to their defaults and you should be fine.
Step 1: Restart your computer and access the BIOS by using the F8 key. It doesn’t always have to be the F8 key, but at the bottom of the Start screen, click the message button (the one with the PC manufacturer’s logo and name).
Step 2: Although BIOS settings vary by manufacturer, you cannot use a mouse in the BIOS, so familiarise yourself with the controls. The Default Settings button can be found at the bottom of the BIOS screen.
The F9 key is commonly used for this. Select Enter after pressing it. If it isn’t already selected, go to the BIOS Exit tab and choose Load Setup Defaults.
When prompted, press Enter. To start your computer, select the Finish Saving Changes option. Check to see if the BSOD occurs again. Step
12. Remove Virtual Image Manager
To generate virtual drives and images, manage ISO files, and more, programmes like Daemon Tools and Alcohol 120 percent are commonly used.
However, because most of these tools are linked to this particular blue screen, it’s a good idea to install them or replace one with another for the time being (for example, Daemon Tools with Alcohol 120). (Substitute percent).
To enter the Settings app, go to the Start menu and click the gear symbol. Locate the software you wish to uninstall in the Apps section and click Uninstall. To use the uninstall wizard, follow the directions on the screen.
13. Avoid Overheating Your Computer
System instability, crashes, and freezes are frequently caused by overheating. This is especially true if you abuse your laptop in a hot room with a faulty cooling system, especially if you’re playing a video game or performing another resource-intensive task.
The simplest way to keep your computer cool is to allow it to breathe by removing any obstructions to air flow. There are normally one or more fans on the front and/or back of the chassis, as well as one on the top of the CPU and one on the power supply.
Unless the CPU fan has been replaced, the fan on your computer may be a low-end fan that cools the processor sufficiently to allow it to function properly, assuming it is running at full power.
Yes, there is. Replace with a more powerful alternative. If your computer is overheating, you should stop overclocking it. For further information, see Solution 1.
Heat buildup on high-end computers can be a problem, and even the most powerful and efficient fans may not be enough to keep the computer cool. Installing a water cooling system will aid in these situations.