How To Fix ‘Bad System Config Info’ Error In Windows 10

Error
Error

The majority of individuals are seeing a Bad system config info error in their Windows 10 programme. But don’t panic; this is a relatively common mistake. It is a relatively common bug or mistake that occurs in Windows 10.

This issue can be caused by a variety of factors, including system and registry file malfunctions, as well as the Boot Configuration Data (BCD) file.

When you install new files on your device or Windows 10, they may conflict with previous files or boot order files, resulting in this issue. The Blue Screen of Death is another name for this problem (BSoD).

Error
Error

Faulty hardware, wrong system settings, a defective driver, and applying a crucial update, among other things, might trigger this bug check error.

In most circumstances, you will be able to check the cause of the error notice when it appears on your screen or when it comes up. The description of why this error occurred in your device will be included in the error message, making your problem much easier to solve.

Read Also:

  1. CLOCK WATCHDOG TIMEOUT
  2. Google Play Services Keeps Stopping
  3. How To Delete Messages on Apple Watch

How To Resolve The Error ‘Bad System Config Info’ in Windows 10

If you’re experiencing the Bad System Config Info error on Windows 10 or perhaps Windows 11, you should read the rest of this post.

Take a look at the following methods for resolving this issue:

Method 1: Perform a RAM and Hard Drive Check

This is the primary and most important way for resolving the Bad System Config Info problem. Although this method appears to be cumbersome, many people have found it to be incredibly useful. To use this procedure, you must first verify your device’s RAM and hard drive.

The issue can also be found in the physical components as well. This issue can occur if your RAM and hard disc are not in excellent working order. This can also happen if there are some fitting issues with your RAM and hard drive.

It’s fine if you’re comfortable examining your computer’s RAM and hard drive. Go ahead and do it. You must ensure that the RAM and hard drive are properly installed in their slots, as well as that they are properly connected. It will only take a few minutes to complete this section.

Also, if you have more than one stick of RAM in your computer, you should remove one of them and see if the error has been resolved. If you connect them and get the same error, that suggests the RAM sticks are the source of the problem. You’ll need to utilise a device with extremely minimal RAM for this.

In other circumstances, if you notice that your RAM and hard drive are correctly connected, the second thing you should check is the RAM and hard drive’s health. If they are not in excellent health, this could be another explanation for the Bad System Config Info issue.

Method 2: Drivers Must Be Updated or Reinstalled

The drivers can also be updated or reinstalled. In the majority of circumstances, if your drivers become obsolete, the worst thing they can do is generate device problems. The Bad System Config Info error could also be caused by outdated drivers.

You must go to the Window Device Manager (Win key, then type device manager) to update or reinstall the drivers. Then, in the Device Manager box, select “Action -> Scan for hardware changes,” and then look for any yellow exclamation point symbols next to any of the devices.

If any of the drivers appear to be troublesome, right-click them and select “Update driver.” If the problem persists, you must right-click the driver and select “Uninstall device.”

In addition, if the driver you’re running is a third-party driver, it will reinstall in your device automatically when you reinstall the software. After that, simply check to see if the problem has been resolved.

Method 3: bcdedit Command

Another reason for this issue is if the system’s configuration is not done correctly or is inaccurate.

To resolve this issue, go to the Advanced Startup menu:

Step 1: To begin, press the start button.

Step 2: After that, simply select Power.

Step 3: Then, while holding down the Shift key, click on Restart.

Step 4: Your screen will display the “Choose an Option” screen, where you must select the troubleshoot option.

Step 5: A new window will open on your screen, prompting you to select Advanced Options.

Step 6: Finally, select Command Prompt.

Step 7: Your PC will restart after this, and a blue screen will display on your screen, prompting you to select your account and press the enter key.

Step 8: Now type the following command into the command prompt:

numproc numproc numproc numproc numproc numproc numproc numproc numproc numproc numproc numproc numproc nump

bcdedit/deletevalue bcdedit/deletevalue bcdedit/deletevalue bcdedit truncatememory

Step 9: Finally, you must close it and restart your computer.

Method 4: Repair The BCD File

The BCD file can get destroyed or corrupted, resulting in this error. It is also critical to fix the BCD file in order to resolve this issue. You’ll need your Windows bootable USB flash drive or the installation DVD for this. If you don’t have a bootable USB device, you can use use the Media Creation Tool.

To put this strategy into action, you should follow the steps outlined below:

Step 1: To begin, insert and boot from your bootable Windows 10 or Windows 11 installation DVD.

Step 2: After that, your device will begin the Windows setup process.

Step 3: Simply click Next.

Step 4: Next, select “Repair your computer” from the drop-down menu.

Step 5: Select “Troubleshoot -> Advanced Options -> Command Prompt” from the Troubleshoot menu.

Step 6: Type the following commands into the command prompt:

/repairbcd bootrec

/osscan bootrec

/repairmbr bootrec

Step 7: Exit it and restart your computer.

Method 5: Clean Up Your Registry

This error could be caused by problems with your device’s registry. However, by following the procedures outlined below, you can easily resolve this issue:

Step 1: Install Windows 10 or 11 by booting from the installation DVD.

Step 2: Select “Troubleshoot -> Advanced Options -> Command Prompt” from the drop-down menu.

Step 3: Type the following commands into the command prompt:

cd C:\Windows\System32\config

C:WindowsSystem32configDEFAULT DEFAULT.old ren C:WindowsSystem32configDEFAULT DEFAULT.old

ren SAM.old C:WindowsSystem32configSAM

C:WindowsSystem32config ren

SECURITY.OLD SECURITY.OLD SECURITY.OLD SECURITY.OLD SECUR

C:WindowsSystem32configSOFTWARE SOFTWARE.old ren C:WindowsSystem32configSOFTWARE SOFTWARE.old

C:WindowsSystem32configSYSTEM SYSTEM.old ren C:WindowsSystem32configSYSTEM SYSTEM.old

Step 4: At the command prompt, type the following commands:

C:WindowsSystem32configRegBackDEFAULT C:WindowsSystem32configRegBackDEFAULT C:WindowsSystem32configRegBackDEFAULT C:WindowsSystem32configRegBackDEFAULT C:WindowsSystem32configRegBackDEFAULT C

C:WindowsSystem32configRegBackDEFAULT C:WindowsSystem32configRegBackDEFAULT C:WindowsSystem32configRegBackDEFAULT C:WindowsSystem32configRegBackDEFAULT C:WindowsSystem32configRegBackDEFAULT C

C:WindowsSystem32configRegBackSAM C:WindowsSystem32configRegBackSAM

C:WindowsSystem32configRegBackSECURITY C:WindowsSystem32configRegBackSECURITY

C:WindowsSystem32configRegBackSYSTEM C:WindowsSystem32configRegBackSYSTEM

C:WindowsSystem32configRegBackSOFTWARE C:WindowsSystem32configRegBackSOFTWARE C:WindowsSystem32configRegBackSOFTWARE C:WindowsSystem32configRegBackSOFTWARE C:WindowsSystem32configRegBackSOFTWARE C

Finally, shut it down and restart your computer.

Method 6: System Restore 

This strategy can also be utilised if none of the other methods have been successful in resolving the problem. To put this strategy into action, follow the steps below:

Step 1: To begin, press the Start button.

Step 2: Next, select Power.

Step 3: Then, while holding down the Shift key, click on Restart.

Step 4: Select “Troubleshoot -> Advanced Options -> System Restore” from the “Troubleshoot -> Advanced Options -> System Restore” menu.

Step 5: From there, you must select your login.

Step 6: It is recommended that you follow all of the prompts on your screen.

Step 7: After that, simply select the desired restoration point.

Step 8: Select Next and wait for the procedure to finish.

After then, check to see if the problem has been resolved.

Method 7: Reset Windows 10 

This is the final option for resolving the Bad System Config Info problem. You must rest your Windows at this point, although it is recommended that you create a backup before doing so. To put this strategy into action, follow the steps below:

Step 1: To begin, press the Start button.

Step 2: After that, select the Power option.

Step 3: Next, hit and hold the Shift key while selecting Restart.

Step 4: Select “Troubleshoot -> Reset this PC” from the menu.

Step 5: Choose “Remove everything -> Only the drive where Windows is installed -> Just remove my data” from the “Remove everything -> Only the drive where Windows is installed -> Just remove my files” menu.

Step 6: Finally, select the Reset option and wait for the procedure to complete. After that, you should check to see if the problem has been resolved.

Read Also:

  1. Driver Power State Failure
  2. There Was A Problem Resetting Your PC
  3. How To Delete Messages on iPhone From Both Sides

Conclusion

It is recommended that all users read the entire article on the Bad System Config Info problem. If you’re having the same problem, you should attempt all of the solutions listed above. They will undoubtedly contribute to the resolution of this problem. I hope this information is useful.