Nowadays, practically everyone, including children, uses a computer or a laptop in their daily lives for school, college, or office job. However, while utilising a PC or laptop, some customers are encountering an error number of 0x80070002 or 80070002.
Do not be concerned if you are also experiencing this issue. It’s a Windows Update error code of 0x80070002, which is quite common.
The 80070003 or 0x80070003 error code can also appear on your PC or laptop. Both error codes refer to the same item. If you’re having the same problem, the remedies listed below will help you solve it.
Read Also:
Contents
What Is Error 0x80070002 and How Do I Fix It?
You’ve come to the correct place if you’re looking for a solution to the problem code 0x80070002 or 0x80070003. You’ll discover a variety of solutions to this problem here. It is not necessary to try all of the ways; if your problem can be solved by attempting only one, that is sufficient.
There are several solutions for resolving this problem, all of which have been attempted by various users and found to be quite effective. As a result, you should also try them to solve your problem.
Why Does The Error 0x80070002 Occur?
The majority of customers are now asking why this error number 0x80070002 occurs.
First and foremost, you should be aware that the code you are encountering may alter depending on which Windows you are using. The error code 0x80070002 can also be found in Windows XP. The problem code 80070002 can be seen in Windows 10/8/7.
Now, the solution to your query is that you are experiencing this issue because some files stay corrupted and missing while your Windows is updating, and your Window is still updated. Errors in your device may result as a result of this.
To find a solution to your problem, use the procedures listed below:
1. Double-check The Time and Date Settings
Many Windows users find this strategy to be extremely beneficial. To put this into action, verify your device’s date and time settings, as suggested by this approach.
It’s possible that it’s one of the main causes of this problem. This issue could be produced by your device if the date and time on your PC or laptop are incorrect. As a result, you should double-check your date and time settings.
If you’re using Windows 7/8, follow these instructions:
Step 1: To begin, click on the Date and Time button in the bottom right corner, and then select Change date and time settings.
Step 2: Next, select Change date and time to check whether the date and time on your Windows are right, then click OK.
Step 3: Now, simply click on Change time zone to verify that your PC’s time zone is correct, and then click OK. Then, at the top, pick the Internet Time option, and then click Change Settings.
Step 4: Now, make sure that the box next to Synchronize with an Internet time server is checked, and then click Update. Finally, click OK. Last but not least, click OK to save all of the changes you’ve made to the settings.
If you’re using Windows 10, follow these instructions:
Step 1: First, type cmd into the search box, then right-click on Command Prompt and select Run as administrator. Finally, select Yes.
Step 2: In the window that appears, type time, date, and w32tm/resync, pressing Enter after each command. Check to check if the time and date are correct. If they are, type the correct time and date into the window and hit Enter.
After that, you must restart your computer or laptop and reinstall Windows to see if the problem has been resolved.
2. Modify The Windows Update Installation Files
You can also try this way to correct the mistake. It is possible that while updating your system, it can fail and the data will be missing or corrupted. To resolve the issue, it is preferable to delete the installed files or rename their folder.
However, you must first stop the Windows Update service before renaming or removing them; otherwise, you will not be able to edit them. To use this approach, follow the procedures outlined below.
Step 1: To invoke the Run box, first hit the Windows logo key + R on your keyboard simultaneously. After that, type services.msc into the box and click OK. You must now double-click Windows Update (and if you are using Windows XP, then double click on Automatic Updates).
Simply change the Startup type to Automatic after that. Then you must ensure that the Service status is set to Stop. If it’s already running, click Stop, then Apply, and finally OK to save the changes.
Step 2: Remove the Software Distribution Folder from your computer. Begin by double-clicking on the drive that contains your Windows installation, which is most likely C drive. After that, navigate to the following folders: Windows > SoftwareDistribution.
Now you must remove the SoftwareDistribution folder from your computer. You can alternatively rename this folder with SoftwareDistributionOld if you don’t want to erase it. After that, simply close all of the windows.
Step 3: Turn on the Windows Update Service again. To invoke the Run box, first hit the Windows logo key + R on your keyboard simultaneously. After that, type services.msc into the box and click OK.
Now, double-click on Windows Update (or, if you’re using Windows XP, double-click on Automatic Updates). Finally, you must restart your computer and reinstall Windows to see if the error has been resolved.
3. Use the Troubleshooter For Windows Updates
This procedure is well-known, and it is frequently used by users to correct many types of problems. This solution can also be used to resolve this issue. To begin, you must first download the Microsoft troubleshooter. It’s now up to you to run it. After that, simply go to Windows Update and select Next.
It will now begin to work on resolving your problem. After that, you must restart your computer and attempt to upgrade Windows again.
4. Use Registry Editor
If you are having problems upgrading your Windows, you should attempt this technique to resolve the problem.However, before you try this approach, make sure your device’s Language setting is set to English (United States).
It is also recommended that you run Windows Media Creation Tool as an administrator. Select Run as administrator from the context menu when you right-click it. After that, simply follow the steps outlined below:
Step 1: Press the Windows logo key + R on your keyboard to begin. After that, simply type Regedit and hit Enter. After that, navigate to HKEY LOCAL MACHINESOFTWAREMicrosoftWindowsCurrentVersionWindowsUpdateOSUpgrade in HKEY LOCAL MACHINESOFTWAREMicrosoftWindowsCurrentVersionWindowsUpdateOSUpgrade.
Step 2: Next, pick the OSUpgrade key, right-click an empty spot in the Registry Editor’s right pane, and select New, then DWORD (32-bit) Value. Right-click the newly formed NewValue#1 and choose Modify from the context menu.
Step 3: Last but not least, update the value name to AllowOSUpgrade, then double-click the number under Value data and enter 1.
Read Also:
- Driver Power State Failure
- There Was A Problem Resetting Your PC
- How To Delete Messages on iPhone From Both Sides
Conclusion
All readers are recommended to read the entire page to learn everything there is to know about the error 0x80070002. The solutions and stages for resolving this problem are also listed above. If you’re having the same problem, you should attempt the procedures listed above to find the best possible solution to your problem.
